← All tips & tricks

The vintage restoration checklist

Build your
bench.

The tools, supplies, and reference material for bringing vintage watches back to life. Start with the job in front of you, then grow your kit as your skills grow.

You do not need to buy everything at once.

For a first exterior cleanup, start with a padded mat, good light, a loupe, soft brushes, microfiber cloths, and the right crystal polish if needed. Add a spring-bar tool when removing a strap. Opening a case and servicing a movement require additional tools and training.

A broad checklist for common jobs, not a universal kit for every caliber. Tool fit and replacement parts depend on the watch. These are general categories, not a claim that Will personally uses or endorses every item listed.

Start here

The bench essentials

For inspection, organization, and careful exterior work.

  • Padded bench mat & case cushion

    Protect the case and keep small parts from bouncing away.

  • Adjustable task light & loupe

    Good lighting plus a comfortable 3–5× loupe; higher magnification helps inspection.

  • Microfiber cloths & soft brushes

    Keep separate cloths for cleaning, polish, and the final wipe.

  • Covered parts trays & labeled containers

    Organize screws and components by assembly. Add a dust cover.

  • Phone camera, notebook & model references

    Record condition, case and movement numbers, and every stage of disassembly.

  • Low-tack masking tape & finger cots

    Protect nearby finishes and reduce fingerprints on clean components.

Beginner

Cleaning & crystal care

Choose the product for the material and condition.

  • Watch cleaning foam or spray

    Use only on compatible exterior materials, applied to a cloth as directed; avoid openings.

  • Mild soap, small bowls & drying towels

    For suitable detached metal bracelets. Keep a vintage watch head dry.

  • Acrylic crystal polish & dedicated applicators

    For confirmed acrylic crystals; use the acrylic polishing guide.

  • Mineral-glass polishing system

    Optional, for suitable uncoated glass. Deep damage may call for replacement.

  • Material-specific strap care

    Leather, suede, rubber, and fabric need different treatment; do not soak leather.

  • Ultrasonic cleaner

    Optional for suitable detached parts. Never put an assembled watch, dial, or hands into the bath.

  • Surface-specific finishing supplies

    Optional and best left until trained. Metal polishing removes material and can erase plating, edges, and original finishes.

As needed

Straps, bracelets & cases

Match the tool to the case construction before applying force.

  • Spring-bar tool & correct replacement spring bars

    Match tip, bar length, diameter, and end style to the watch.

  • Bracelet block, pin punches & small hammer

    For appropriate pin-and-collar bracelets; retain the collars and follow the pin direction.

  • Precision screwdrivers & spare blades

    For screwed links and case screws. Fit the blade to the slot; maintain its edge.

  • Case holder & correct case-back opener

    A case knife for suitable snap backs; a fitting wrench or die for screw backs. Front-loading cases need their own method.

  • Digital calipers

    Measure lug width, crystals, gaskets, and replacement parts; confirm the part specification too.

  • Case/crystal press & correctly fitting dies

    For compatible closures and crystals; support the case properly and keep pressure off the crystal where inappropriate.

  • Model-specific crystals, gaskets & seals

    Order for the exact case. Gasket grease only where specified; fresh seals do not prove water resistance.

  • Crystal lift or dedicated removal tools

    Optional and construction-specific; not every acrylic crystal accepts a lift.

Trained work

Hands, dials & movement handling

Add these when you are ready for internal work on a practice movement.

  • Antimagnetic precision tweezers

    Use clean, aligned tips; add non-marring tweezers where appropriate.

  • Correct movement holder & movement cushion

    Support the caliber securely without contacting vulnerable parts.

  • Hand removers, dial protectors & hand-setting tools

    Fit the tools and support the movement correctly. Hand clearance matters.

  • Hand air blower, pegwood & pith wood

    For appropriate dust removal and tool cleaning; no breath or canned propellant on movements.

  • Watchmaker cleaning putty

    Use selectively on compatible surfaces; never assume a vintage dial or printing tolerates contact.

  • Stem vise, cutters & fine file

    For fitting a replacement stem to the case; cut gradually and finish the threads.

  • Caliber documentation & inexpensive practice movement

    Learn stem release, power let-down, disassembly, and reassembly before working on a sentimental watch.

Diagnostics

Measure before you adjust

A running watch can still need a service.

  • Mechanical timegrapher

    Read rate, beat error, and amplitude using the correct lift angle. Results need interpretation and do not certify service condition.

  • Watch demagnetizer

    For appropriate mechanical watches when magnetism is confirmed or suspected; follow the device instructions.

  • Multimeter & suitable battery tester

    For trained quartz diagnostics. Tuning-fork and electronic movements may need specialist equipment.

  • Correct cell or rechargeable storage unit

    Match the movement specification, chemistry, voltage, and contacts; solar watches need the specified rechargeable unit.

  • Water-resistance test equipment or watchmaker testing

    Have the assembled watch tested before claiming water resistance. A vintage depth marking is not proof of current sealing.

Advanced

Full movement servicing

A separate skill set, requiring training and caliber-specific procedures.

  • Movement cleaning system, baskets & approved fluids

    Use a compatible cleaning/rinsing process for disassembled parts; observe ventilation, fire precautions, and fluid instructions.

  • Precision oilers & covered oil cups

    For controlled application at the specified lubrication points.

  • Caliber-specified oils, greases & lubrication chart

    There is no universal oil for every point. Household oil and WD-40 do not belong in a watch movement.

  • Mainspring winders & barrel tools

    Choose the sizes and winding direction required by the caliber; learn safe power let-down first.

  • Microscope & inspection tools

    Inspect pivots, jewels, wear, and cleanliness beyond what a low-power loupe shows.

  • Replacement movement parts & service records

    Source parts by caliber and variant; document substitutions and preserve original parts.

  • Staking/jeweling tools, reamers & specialist fixtures

    For trained repair work. Lathes, escapement work, and balance repairs belong further along the learning curve.

Preserve the story

Know when to stop.

  • Keep original dials and hands original.

    Do not scrub, polish, or apply cleaning solutions to a vintage dial. Stabilizing fragile surfaces and working on lume are specialist jobs.

  • Suspected radium lume needs a specialist.

    Do not open or dismantle a suspected radium watch, scrape luminous paint, or blow out dust. EPA advises against taking apart radium watches and instrument dials.

  • Protect the case shape and plating.

    Start with cleaning. Aggressive polishing can remove metal, soften edges, and cut through plating. A clean, honest vintage watch does not need to look newly manufactured.

  • Practice before tackling the keeper.

    Use an inexpensive practice movement. Rare parts, damaged hairsprings, and sentimental watches are good reasons to involve a qualified watchmaker.

References: Bergeon tool catalog · Seiko care guidance · EPA: radioactivity in antiques. Follow tool and product instructions and the technical documentation for your exact watch.

Choosing your next project? Read the vintage buying checklist →

Put the basics to work

Start with care.