← All tips & tricks

Crystal care / Beginner · By hand

Polishing acrylic crystals

Small scratches can hide a great dial. Start gently, use a polish made for acrylic, and inspect your progress as you go.

Before you begin

Confirm the crystal material from the watch’s specifications or a watchmaker. Do not identify it by deliberately scratching it. Cracks, crazing, loose crystals, and valuable original crystals deserve professional assessment.

The process

Step by step

  1. Clean and inspect

    Remove loose grit with a clean, soft cloth. Check for cracks and chips before applying any polish.

  2. Protect the surrounding finish

    Carefully mask the bezel and case, leaving the crystal exposed. Keep polish away from the crown, seals, and dial. Test tape on delicate finishes first.

  3. Polish by hand

    Apply the amount specified by the polish manufacturer to a clean cloth. Work the scratched area with controlled, even hand pressure for the instructed duration. Avoid powered tools and excessive heat.

  4. Wipe and check

    Remove residue with a separate cloth and inspect under angled light. Repeat only as directed; stop if the surface becomes distorted or damaged.

  5. Finish gently

    Remove the masking tape and wipe away residue. A clearer crystal does not mean the watch is water-resistant.

Common mistakes

  • Using plastic polish on mineral glass or sapphire and expecting the same result.
  • Trying to remove every deep scratch by repeatedly cutting away material.
  • Polishing a dirty crystal, or using a contaminated cloth.

Further reading: polyWatch Plastic Polish ↗. Always follow the current instructions supplied with your product.

Keep learning