← All tips & tricks

Crystal care / Advanced · Evaluate first

Polishing mineral glass crystals

Mineral glass takes a different approach from acrylic. Use a dedicated glass-polishing system, set realistic expectations, and weigh polishing against replacement.

Before you begin

Confirm both the glass type and whether the surface is coated. Do not polish coated surfaces unless the coating and polish manufacturers expressly permit it. Cracks, edge chips, deep scratches, or an unknown coating are reasons to consult a watchmaker.

The process

Step by step

  1. Decide whether to polish

    Inspect the scratch and get a replacement quote if it is deep or widespread. Polishing removes material; chasing damage can leave an uneven optical surface.

  2. Choose glass polish

    Use a system intended for mineral glass, such as polyWatch Glass Polish. Acrylic polish and generic headlight products are not substitutes for a verified glass-polishing process.

  3. Prepare and protect

    Remove surface dirt and mask the surrounding bezel and case. Read the complete product instructions before starting. Keep all compounds away from openings and seals.

  4. Follow the system in order

    Use the supplied tools, pressure, duration, and stages exactly as directed. If your system has cutting and finishing stages, keep their applicators separate. This guide does not prescribe a universal grit or machine speed.

  5. Inspect between stages

    Clean away residue and check under angled light. Stop if you see unevenness, coating changes, or increasing distortion. Finish and clean according to the product instructions.

Common mistakes

  • Assuming the easy acrylic method transfers directly to glass.
  • Polishing an anti-reflective or other coated surface without checking compatibility.
  • Using a rotary tool or pursuing deep damage without considering replacement.

Further reading: polyWatch Glass Polish instructions ↗. Always follow the current instructions supplied with your product.

Keep learning